Products » Shock Test Systems » AutoShock II™ Automated Shock Test Systems

AutoShock II™ Automated Shock Test Systems

The AutoShock-II ™ is a fully automated series of shock test systems used to measure and identify product fragility levels and evaluate protective packaging. With the simulation of real world shock pulses, including half sine, square wave and sawtooth pulse shapes, as well as impact energy levels, manufacturers can systematically test and optimize product design and packaging. L.A.B. Equipment, Inc.’s fully automated computer controlled shock and data analysis test systems are the critical path in accomplishing this optimization.

View More Details

The AutoShock-II ™ is a fully automated series of shock test systems used to measure and identify product fragility levels and evaluate protective packaging. With the simulation of real world shock pulses and impact energy levels, manufacturers can systematically test and optimize product design and packaging. L.A.B. Equipment, Inc.’s fully automated computer controlled shock and data analysis test systems are the critical path in accomplishing this optimization.

AutoShock-II™

Standard features

  • State-of-the-art, PC-based control system with Windows-based, intuitive Remote Control interface
  • Advanced, integrated Shock Drop Calculator translates shock parameters – waveform, acceleration, duration – into equipment settings (drop height, square wave pressure, etc.)
  • Precision guidance system with balanced hydraulic lift cylinders
  • High performance cast or welded aluminum table designs provide optimum stiffness and waveform fidelity
  • Closed-loop height and pressure controls provide optimal waveform repeatability
  • Table sizes to 152 x 152cm (60” x 60”)
  • Up to 2000 kg (4,400 lbs.) payload capacities available
  • Low profile design minimizes overall system height

 

 

Optional features

  • Low profile, dual waveform (half-sine and square wave) shock pulse programmers
  • Half-sine elastomer module kits
  • Terminal peak sawtooth programmers
  • Low velocity impulse kits
  • High velocity impulse kits
  • Dual mass shock amplifiers
  • Data acquisition and analysis systems
  • Safety mat interlock systems
  • Enlarged table sizes
  • Floor plate/installation kits

ModelAS-II 24×32AS-II 36AS-II 36×42AS-II 48AS-II 48×60AS-II 60
*Table Size (W x L)61 x 81 cm (24” x 32”)91 x 91 cm (36” x 36”)91 x 107 cm (36” x 42”)122 x 122 cm (48” x 48”)122 x 152 cm (48” x 60”)152 x 152 cm (60” x 60”)
Seismic Base Weight1,700 kg2,300 kg4,050 kg5,800 kg7,000 kg8,200 kg
Nominal Specimen Weight90 kg140 kg205 kg270 kg335 kg400 kg
Maximum Specimen Weight600 kg600 kg600 kg900 kg900 kg900 kg
Machine Weight2,300 kg3,200 kg4,500 kg5,800 kg7,100 kg8,400 kg
Machine Dimensions1.22 x .86 x 2.75 m1.63 x 1.07 x 2.75 m1.63 x 1.22 x 2.75 m1.93 x 1.63 x 2.80 m1.93 x 1.63 x 2.85 m2.30 x 1.63 x 2.85 m
Pulse Duration2.0 – 65 ms2.0 – 65 ms2.0 – 60 ms3.0 – 60 ms3.0 – 60 ms3.0 – 60 ms
Max. Free Fall Velocity Change: Half-sine, Trapezoidal, Squarewave7.3 m/s7.0 m/s7.0 m/s7.0 m/s7.0 m/s7.0 m/s
Max. Accelerated Fall Velocity Change: Half-sine, Trapezoidal, Squarewave12.2 m/s11.6 m/s11.6 m/s11.6 m/s11.6 m/s11.3 m/s
Maximum Acceleration600g600g600g600g600g500g
Utility RequirementsSingle-phase and 3-phase electric power, 80 – 100 psi air utility, and a 2200 psi nitrogen supply

 

For additional information or to speak with a professional, call 630-595-4288.

Click to access the login or register cheese